The PDu100 is the industry's smallest and lightest driver for piezoelectric actuators. The PDu100 can drive two-wire piezoelectric actuators and benders up to +/-100 V. The PDu100 can also drive three-wire piezoelectric benders and stack actuators up to +100 V. Applications include battery powered robotics, piezoelectric motors, and ultra low-power positioning and manipulation systems.

Key features include:

• +/-100V Output voltage range for piezo actuators and two-wire benders
• +100V Output voltage range for stack actuators
• Bias supply for three-wire bender actuators
• Output current: 15mA
• Supply voltage: 3V to 5.5V
• Dimensions: 12x13mm (0.5x0.5in)
• Mass: 0.5 grams (0.018oz)

The PDu100B is a complete miniaturized power supply and linear amplifier for driving piezoelectric actuators. The PDu100B provides variable gain and offset, switchable voltage ranges, and the choice between ground referenced or differential inputs and outputs. The PDu100B can drive two-wire piezoelectric actuators and benders up to +/-100V and three-wire piezoelectric benders and stack actuators up to +100V. Applications include piezoelectric valves, motors, pumps and low-power positioning and manipulation systems.

Key features include:

• Selectable output voltage range 100V, 90V, or 60V
• Bipolar or unipolar output
• Bias supply for three-wire bender actuators
• Peak output current: 100mA
• Average output current: 40mA
• Supply voltage: 3V to 5.5V
• Dimensions: 25x40mm (1x1.5in)
• Mass: 5.5 grams (0.2oz)

The PDm200 is a complete high-performance power supply and linear amplifier module for driving piezoelectric actuators. The output voltage range can be switched between bipolar or unipolar modes with a range of 100V, 150V, or 200V. Up to +\-400 V can be achieved in the bridged configuration. In the unipolar mode, the negative output range is fixed at -30V for use with stack actuators. Applications include: electro-optics, ultrasound, vibration control, nanopositioning systems, and piezoelectric motors.

Key features include:

• Selectable voltage range from +100V to +/-400V
• Bipolar or unipolar output
• Bias supply for 200V bender actuators
• Signal Bandwidth: 200kHz
• Power Bandwidth: 63kHz (100Vp-p)
• Noise: <1mV (1uF load)
• Peak output current: 300mA
• Average output current: 46mA
• Dimensions: 71x38mm (2.8x1.5in)

The PDL200 is a compact, high-performance voltage amplifier for driving piezoelectric stack actuators. It's compact size, ease of use and rugged enclosure make it suitable for a wide variety of scientific and industrial applications.

Key features include:

• -10V to 200V Output voltage range
• 600mA Peak output current
• Selectable voltage limit of 60V, 150V and 200V
• Dynamic current limiting for high power-bandwidth
• Up to 400kHz signal bandwidth
• Less than 150uV RMS noise with a 1uF load
• Stable with unlimited capacitive loads
• Front panel offset voltage adjustment 0V to 200V
• Comprehensive overload protection
• Desktop, sub-rack, or DIN-rail mounting options

The PDX amplifiers are the fastest and most powerful voltage amplifiers available for driving piezoelectric actuators. They are capable of driving large stack actuators at high-speed and with low noise. PDX amplifiers are used in demanding applications such as High-Speed Physics, Scanning Probe Microscopy and Piezoelectric Vibration Control.

Key features include:

• -30V to 150V or 200V Output voltage range
• Up to 10A peak output current
• Exceptional full-power bandwidth up to 9.5 kHz
• Exceptional bandwidth with large capacitive loads
• Less than 300uV RMS noise with a 10uF load
• Stable with unlimited capacitive loads
• Front panel offset voltage adjustment 0V to 200V
• Comprehensive overload protection
• External shutdown
• Front panel monitoring of voltage and current
• Desktop or rack mounting options