PD200 60W Voltage Amplifier

AUD$2,610.00

Clear
SKU: PD200 Category:

Description

The PD200 is a high bandwidth, low-noise linear amplifier for driving piezoelectric actuators. The output voltage range is user-selectable from +/-100V to +200V which is suited to stack actuators; standard piezoelectric actuators; and three-wire piezoelectric benders. The output connectors include BNC, screw terminals, LEMO 00, and LEMO 0B so any commercially available piezoelectric actuator can be connected directly.

Key features include:

  • Flexible output voltage range, +/-100V to +200V
  • Up to +/-200V and 120W in bridge mode
  • Up to 10A peak output current
  • Exceptional full power bandwidth, 230 kHz
  • Exceptional signal bandwidth, 680 kHz
  • Less than 714uV RMS noise with a 10uF load
  • Front panel offset voltage adjustment
  • Comprehensive overload protection
  • Front panel monitoring of voltage and current
  • Continuous short-circut protection

View Specifications

Additional information

Weight 3.00 kg
Dimensions 36 × 24 × 16 cm
Output Voltage

0V to +200V (Default), 0V to +150V, 0V to +100V, 0V to +50V, -50V to +150V, -50V to +100V, -50V to +50V, -100V to +100V, -100V to +50V

Peak Current

2 Amps (Default), 10 Amps (PULSE Option)

Amplifier Gain

+20 (Default), -20 (INV Option)

Offset Range

Zero to positive full range (Default), Negative to positive full range (OR2 Option)

Offset Source

Front Panel (Default), PCB Trimpot (OS2 Option)